Points forts
| TDMA DMR Digital Air Interface - 2 slot/1 carrier in 12.5kHz | 
| DMR Tier 2 Conventional Repeater Operation. Complies with ETSI TS 102 361-1/-2/-3  | 
| Operates in DMR Digital and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue) | 
| QT/DQT/Colour Code signalling | 
| DMR Frame Error detection | 
| Vocoder FEC Threshold | 
| Multi-Site IP Network Mode (via KTI-5 option) | 
Accessoires fournis
| Câble | Oui | 
| Câble d' alimentation CC | Oui | 
| Pied | Oui, 4 pièces | 
| Front Glass | Oui | 
| Fusible | Oui | 
| Poignée | Oui | 
| Hardware Fixture | Oui | 
| Mode d'emploi | Oui, En anglais, français, espagnol, italien, allemand, néerlandais, turc, grec et russe | 
| Ensemble de vis | Oui | 
Caractéristiques base et répétiteur
| 16 CTCSS/DCS Repeater Controller Built-In | Oui | 
| 19" Rack Mount Design | Oui | 
| "Base Station" or "Repeater" Mode Operation | Oui | 
| DTMF AUX Input Monitoring | Oui | 
| DTMF AUX Output Control | Oui | 
| DTMF Front Panel PF-Key Control | Oui | 
| Flash ROM for Future Upgrades | Oui | 
| Front Mounted Speaker | Oui | 
| Hang Timer | Oui | 
| LED Display & Indicators | Oui | 
| Microphone Jack on Front Panel | Oui | 
| Programmable AUX I/Os | Oui | 
| Programmable Function Keys | 6 | 
| RF Power-down Detect | Oui | 
| Volume Control on Front Panel | Oui | 
| Windows Programming and Tuning Software | Oui | 
Caractéristiques DMR
| AMBE+2 Vocoder | Oui, (Future Update) | 
| Colour-code Repeater Control | Oui | 
| Console Interface | Oui, with optional KTI-5 | 
| Conventional IP Network | Oui, with optional KTI-05 | 
| Repeater Control Built-in | Oui | 
| TDMA 2-slot System Architecture | Oui | 
Normes applicables
| For use in the EU | Oui | 
| Measurement - EN Standards | Oui | 
Spécifications techniques
| Frequency Range - E Type | 136-174 MHz | 
| Number of Channels | 30 | 
| Channel Frequency Spread | 38 MHz | 
| Channel Spacing - Analogue - Wide/Narrow | 25 kHz/12,5 kHz | 
| Channel Spacing - Digital | 12,5 kHz | 
| Antenna Impedance - 50 Ohm | Oui | 
| Current drain | Stand-By: 0.5 A  Receive: 1.0 A Transmit: 11.0 A  | 
| Frequency Stability- ± 1 ppm | Oui | 
| Operating Temperature Range | -30 °C to + 60 °C | 
| Operating Voltage | 13.2 V DC (10.8 ~ 15.6 V DC) | 
| PLL Channel Steps | 2.5 kHz / 3.125 kHz | 
| Dimensions (WxHxD) | 483 x 88 x 340 mm  - Projections not included -  | 
| Weight (net) | 9.7 kg | 
Caractéristiques du récepteur
| Adjacent Channel Selectivity (Analogue) | 25 kHz / 12.5 kHz = 83 dB / 77 dB | 
| Audio Output | External Speaker: 4 W with less than 5% distortion at 4 Ohm | 
| FM Hum & Noise | 25 kHz / 12.5 kHz - 55 dB / 50 dB | 
| Intermodulation | 72 dB | 
| Sensitivity - EN 12 dB SINAD | 0.28 µV | 
| Sensitivity - EN 20 dB SINAD | -3 dBµV | 
| Sensitivity (Digital) | At 12.5 kHz - 5% BER: 0.25 µV 1% BER: 0.35 µV | 
| Spurious Response Rejection | 85 dB | 
Caractéristiques d'émetteur
| RF Power Output | 5 W to 50 W at 50% Duty Cycle (25 W at 100% Duty Cycle) | 
| Audio Distortion | Less than 1% at 1 kHz | 
| FM Noise (Wide/Narrow) | 55 dB / 50 dB | 
| Modulation Limiting | Analogue:  ± 5.0 kHz at 25 kHz ± 2.5 kHz at 12.5 kHz  | 
| Spurious Emission (EN) | -36 dBm ≤ 1 GHz  -30 dBm > 1 GHz  | 



							










